The addition of a tension screw system in every shutter panel assures that whether the shutter is brand new or decades old, it will never become too tight or too loose to operate properly. By the slight turn of a screw inside the stile, the louver tension is either increased or decreased.

One of the most tiresome experiences of shutter owner is staple failure. We use extra-long stainless steel staples in the louvers and tilt-rod to insure that they do not pull out. The stainless steel staples is resistant to corrosion and temperature changes, which assures that the staples will hold for the life of the shutter panel.

The industry standard for the joinery of stile and rail are relying on just glued, dowel joints or screw joints. These will eventually work loose as sold at local home improvement centers. Mortise & Tenon joints are designed to allow for maximum glue surface area to withstand shear and racking stress and to ensure the safety. This joinery have been used for centuries in demanding furniture and building construction because of their combination of superior strength and simplicity.

Mortised hinges are important to achieve a tight fit within your window opening. Without a mortised panel, a gap appears on the hanging side that allows light to break between the panel and selected frame. Basic material, comstruction and finish are elements of quality in any hinge. A good hinge should have at least five-knuckle joints for better load distribution and smoother, quieter action. Pivot hinges should have firmly riveted joint pins. The material from which the hinge is made should be suffciently heavy to prevent sagging and should be resistant to normal moisture.